Mount your Insta360 ONE X3, ONE RS, ONE X2, ONE X, ONE, or GO 2 camera onto your motorcycle using this Motorcycle Mount Bundle for exciting action shots and 360° motion views. The bundle includes a heavy-duty double ball-mount head with handlebar clamp, a helmet mount with a 6.46" extension arm, a tail mount, a cockpit mount, and all the adhesive stickers and screws required to mount your camera securely on different parts of your motorcycle. The handlebar clamp can fit handlebars with a 0.66 to 1.18" diameter.

Compatible with Insta360 ONE X3, ONE RS, ONE X2, ONE X, ONE, and GO 2 cameras

Extension rod measures 6.46" in length

The heavy-duty clamp is compatible with handlebars that measure 0.66 to 1.18" in diameter

Stickers work best on smooth surfaces and when you adhere them 24 hours prior to mounting

You can keep the extension rod or clamp invisible if using directly under the camera

The mounts should only be used with an optional selfie stick that has a 28.5" maximum length and should not be used at speeds exceeding 50 mph

All-new universal powerful clamp, securely fixing your camera to handlebars, bumpers, and more.

Flexible adhesive mount, fits perfectly on your helmet, fuel tank, or windshield, unlocking even more shooting angles.

Specs

• Weight (Heavy Duty Clamp Mount):272g (9.6oz)
• Dimensions (Heavy Duty Clamp Mount):124x73x53mm (4.9x2.9x2.0in)
• Weight (Flexible Adhesive Mount):40g (1.4oz)
• Dimensions (Flexible Adhesive Mount):66.5x66.5x48mm (2.6x2.6x1.9in)

Notes

1. Follow these instructions to use the Flexible Adhesive Mount: 

a. Clean the base with a cleaning wipe before use. Ensure the surface is clean, dry and smooth.

b. If the sticky base detaches from the surface, it cannot be reused.

c. To ensure a strong hold, press and hold the product for 30 seconds after sticking to a surface.

d. Wait at least 24 hours after sticking to use it with a product.

e. If the 3-prong adapter becomes worn, apply the anti-slip ring for more security.

f. This product cannot be used with any selfie sticks.

2.The Heavy Duty Clamp is for mounting to round tubes such as handlebars or bumpers, with a diameter range of 17 to 37mm(0.6–1.5in). Do not attach to irregularly shaped objects as there is a risk of detachment.

3. When attaching the Heavy Duty Clamp Mount to a smooth metal tube, it is recommended to use the included wrench to tighten it.

4. When installing a selfie stick on the Heavy Duty Clamp Mount, we recommend you use the Insta360 Action Invisible Selfie Stick, extended to ≤100cm.

5. Only connect the selfie stick using the 1/4" screw on the Heavy Duty Clamp Mount. Do not install other accessories and then add the selfie stick.

6. If mounting the camera directly to the Heavy Duty Clamp Mount, maximum speed should not exceed 80km/h on smooth roads, or 40km/h when going off-road. Only mount the selfie stick on the motorcycle when riding on smooth roads and ensure the mount is tightened with the included wrench before use.

7. Install the Flexible Adhesive Mount and Heavy Duty Clamp Mount according to the instructions in the manual. Insta360 will not be responsible for any damage or loss that occurs if setup does not match the instructions in the manual.